MCOHOME - Fan Coil Thermostat 2 pipes MH8-FC Z-Wave+
Fan Coil Thermostat MH8 is a Z-Wave Plus enabled device for indoor temperature control.
It is mainly applied to a 2-pipe Fan coil system.
It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.
FEATURES
Capacitive touch buttons
Tempered glass panel, PC alloy enclosure
Precise temperature calibration function
Non-volatile Memory, working state saved even power failure
Intelligent on/off control of 3-speed fan, electric (ball) valve or air-valve
Easily steel frame back plate installation
TECHNICAL PARAMETRS
Power Supply:AC85V~260V, 50/60HZ
Resistive Load: ≤3A
Self Consumption:< 1W
Display Accuracy: 0.1 ℃
Working Environment:0~55℃; <95% RH(Non-condensation)
Temp. Setting :5~35℃(41~95℉)
Dimension:86* 86*42mm
Hole Pitch:60-65mm(86 Standard junction box)
Z-Wave Frequency: 868.42MHz(EU)/ 908.4MHz(US), 921.4MHz(AU) or other customized frequency
MCOHOME - Fan Coil Thermostat 2 pipes MH8-FC Z-Wave+
- Ražotājs: MCO HOME
- Modelis: MH8-FC
- Pieejamība: Pre-Order
-
104,99€
- Bez nodokļa: 86,77€
MCOHOME - Fan Coil Thermostat 2 pipes MH8-FC Z-Wave+
Fan Coil Thermostat MH8 is a Z-Wave Plus enabled device for indoor temperature control.
It is mainly applied to a 2-pipe Fan coil system.
It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.
FEATURES
Capacitive touch buttons
Tempered glass panel, PC alloy enclosure
Precise temperature calibration function
Non-volatile Memory, working state saved even power failure
Intelligent on/off control of 3-speed fan, electric (ball) valve or air-valve
Easily steel frame back plate installation
TECHNICAL PARAMETRS
Power Supply:AC85V~260V, 50/60HZ
Resistive Load: ≤3A
Self Consumption:< 1W
Display Accuracy: 0.1 ℃
Working Environment:0~55℃; <95% RH(Non-condensation)
Temp. Setting :5~35℃(41~95℉)
Dimension:86* 86*42mm
Hole Pitch:60-65mm(86 Standard junction box)
Z-Wave Frequency: 868.42MHz(EU)/ 908.4MHz(US), 921.4MHz(AU) or other customized frequency