FIBARO Žalūziju vadības modulis Roller Shutter 3
FIBARO Roller Shutter 3 ir ierīce, kas paredzēta rullo žalūziju, nojumju, žalūziju, vārtu un citu vienfāzes maiņstrāvas darbināšanai. Roller Shutter 3 ļauj precīzi pozicionēt rullo žalūzijas vai žalūzijas. Ierīce ir aprīkota ar enerģijas un enerģijas monitoringu. Tas ļauj kontrolēt pievienotās ierīces vai nu ar Z-Wave tīklu, vai ar tieši tai pieslēgtu slēdzi.
Description:
The FIBARO Roller Shutter 3 allows you to control electric roller blinds, awnings, venetian blinds, garage doors and gates.
Product Overview:
FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. Roller Shutter 3 allows for precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Features:
- Compatible with any Z-Wave or Z-Wave+ Controller,
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2
- Authenticated with PRNG-based encryption,
- To be installed with roller blind motors with electronic or mechanical limit switches,
- Advanced microprocessor control,
- Active power and energy metering functionality,
- Works with various types of switches – momentary, toggle and dedicated roller blind switches,
- To be installed in wall switch boxes.
Technical Data:
- Power Source: 100-240V~50/60Hz
- Rated load current:
* 4.2A for lamps and resistive loads
* 1.7A for motors with compensated power factor (inductive loads)
- Supported motor type: single-phase AC motors,
- Required limit switches: electronic and mechanic,
- Power consumption: up to 0.8W
- Operating temperature: 0°C - 35°C,
- Active element: micro-gap relay switch μ,
- For installation in boxes: Ø = 50mm, depth ≥ 60mm,
- Radio protocol: Z-Wave (500 series chip),
- Radio signal power: up to 5dBm,
- Radio frequency band: 868.4 MHz
- Range: up to 50m outdoors, up to 40m indoors (depending on the terrain and building structure),
- Outside dimensions (L x W x H) 42.5mm x 38.25mm x 20.3mm
- Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
FIBARO Roller Shutter 3
- Ražotājs: FIBARO
- Modelis: FGR-223
- Pieejamība: Pieejams
-
69,90€
- Bez nodokļa: 57,77€
FIBARO Žalūziju vadības modulis Roller Shutter 3
FIBARO Roller Shutter 3 ir ierīce, kas paredzēta rullo žalūziju, nojumju, žalūziju, vārtu un citu vienfāzes maiņstrāvas darbināšanai. Roller Shutter 3 ļauj precīzi pozicionēt rullo žalūzijas vai žalūzijas. Ierīce ir aprīkota ar enerģijas un enerģijas monitoringu. Tas ļauj kontrolēt pievienotās ierīces vai nu ar Z-Wave tīklu, vai ar tieši tai pieslēgtu slēdzi.
Description:
The FIBARO Roller Shutter 3 allows you to control electric roller blinds, awnings, venetian blinds, garage doors and gates.
Product Overview:
FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. Roller Shutter 3 allows for precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Features:
- Compatible with any Z-Wave or Z-Wave+ Controller,
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2
- Authenticated with PRNG-based encryption,
- To be installed with roller blind motors with electronic or mechanical limit switches,
- Advanced microprocessor control,
- Active power and energy metering functionality,
- Works with various types of switches – momentary, toggle and dedicated roller blind switches,
- To be installed in wall switch boxes.
Technical Data:
- Power Source: 100-240V~50/60Hz
- Rated load current:
* 4.2A for lamps and resistive loads
* 1.7A for motors with compensated power factor (inductive loads)
- Supported motor type: single-phase AC motors,
- Required limit switches: electronic and mechanic,
- Power consumption: up to 0.8W
- Operating temperature: 0°C - 35°C,
- Active element: micro-gap relay switch μ,
- For installation in boxes: Ø = 50mm, depth ≥ 60mm,
- Radio protocol: Z-Wave (500 series chip),
- Radio signal power: up to 5dBm,
- Radio frequency band: 868.4 MHz
- Range: up to 50m outdoors, up to 40m indoors (depending on the terrain and building structure),
- Outside dimensions (L x W x H) 42.5mm x 38.25mm x 20.3mm
- Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
Instrukcija – OPERATING MANUAL
Atslēgvārdi: FIBARO Roller Shutter 3