FIBARO CO Sensor FGCD-001

CO sensors ir īpaši viegls, kompakts, ar baterijām darbināms Z-wave oglekļa monoksīda detektors, paredzēts izvietot pie sienas. Tā augstā jutība ļauj agrīnā stadijā noteikt oglekļa monoksīda (CO) gāzes klātbūtni un novērst saindēšanos.
Trauksmi signalizē ar iebūvētu sirēnu, mirgojošu LED indikatoru un paziņojuma nosūtīšanu, t
urklāt ierīce ir aprīkota ar temperatūras sensoru.

Šis oglekļa monoksīda sensors var darboties kā atsevišķa ierīce. Šajā gadījumā tas nenodrošina funkcijas, kas pieejamas sistēmā, bet joprojām ir precīzs un efektīvs. Jūs varat to izmantot pats vai dāvināt saviem mīļajiem, pat ja ne jūs, ne viņi neizmanto FIBARO sistēmu.

Description: FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.

Product Overview:
FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning. Alarm is signalled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices. Additionally, the device is equipped with a temperature sensor.

Product Highlights:
- Compatible with any Z-Wave or Z-Wave+ Controller, Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
- May be used as stand-alone carbon monoxide detector,
- Wall-mounted,
- Battery-powered,
- Completely wireless,
- Alarm signalled with a built-in siren and LED diode,
- Built-in temperature sensor.

Technical Data:
- Battery type: CR123A 3.0V battery (included)
- Battery life: 3 years on default settings (tested with Panasonic Industrial Lithium)
- Lifespan under typical conditions: 8 years
- CO concentration measurement range: 0-450 ppm
- Measuring accurancy: ±10ppm / ±5%
- Operating temperature: 0 - 50 oC
- Alarm response times on default settings: 50ppm 60-90min; 100ppm 10-40min; 300ppm <1.5min
- Alarm siren sound level: 85 dBA at 3 meters
- EU directives compliance: R&TTE 1999/5/EC; RoHS 2011/65/EU; EN 60950-1
- Radio protocol: Z-Wave (500 series chip)
- Radio frequency: 868.4, 868.42 or 869.8 MHz EU
- Range: up to 50m outdoors, up to 40m indoors (Depending on terrain and building structure)
- Temperature measuring range: 0 - 60oC
- Dimensions (Diameter x Height): 65mm x 28mm

Instrukcija – OPERATING MANUAL

Prezentācija

FIBARO CO Sensor

  • Ražotājs: FIBARO
  • Modelis: FGCD-001 ZW5
  • Pieejamība: Pieejams
  • 99,97€

  • Bez nodokļa: 82,62€

FIBARO CO Sensor FGCD-001

CO sensors ir īpaši viegls, kompakts, ar baterijām darbināms Z-wave oglekļa monoksīda detektors, paredzēts izvietot pie sienas. Tā augstā jutība ļauj agrīnā stadijā noteikt oglekļa monoksīda (CO) gāzes klātbūtni un novērst saindēšanos.
Trauksmi signalizē ar iebūvētu sirēnu, mirgojošu LED indikatoru un paziņojuma nosūtīšanu, t
urklāt ierīce ir aprīkota ar temperatūras sensoru.

Šis oglekļa monoksīda sensors var darboties kā atsevišķa ierīce. Šajā gadījumā tas nenodrošina funkcijas, kas pieejamas sistēmā, bet joprojām ir precīzs un efektīvs. Jūs varat to izmantot pats vai dāvināt saviem mīļajiem, pat ja ne jūs, ne viņi neizmanto FIBARO sistēmu.

Description: FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.

Product Overview:
FIBARO CO Sensor is an ultra-light, compact, battery-powered carbon monoxide detector, designed to be placed on a wall. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning. Alarm is signalled with a built-in siren, blinking LED indicator and by sending commands to Z-Wave network devices. Additionally, the device is equipped with a temperature sensor.

Product Highlights:
- Compatible with any Z-Wave or Z-Wave+ Controller, Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
- May be used as stand-alone carbon monoxide detector,
- Wall-mounted,
- Battery-powered,
- Completely wireless,
- Alarm signalled with a built-in siren and LED diode,
- Built-in temperature sensor.

Technical Data:
- Battery type: CR123A 3.0V battery (included)
- Battery life: 3 years on default settings (tested with Panasonic Industrial Lithium)
- Lifespan under typical conditions: 8 years
- CO concentration measurement range: 0-450 ppm
- Measuring accurancy: ±10ppm / ±5%
- Operating temperature: 0 - 50 oC
- Alarm response times on default settings: 50ppm 60-90min; 100ppm 10-40min; 300ppm <1.5min
- Alarm siren sound level: 85 dBA at 3 meters
- EU directives compliance: R&TTE 1999/5/EC; RoHS 2011/65/EU; EN 60950-1
- Radio protocol: Z-Wave (500 series chip)
- Radio frequency: 868.4, 868.42 or 869.8 MHz EU
- Range: up to 50m outdoors, up to 40m indoors (Depending on terrain and building structure)
- Temperature measuring range: 0 - 60oC
- Dimensions (Diameter x Height): 65mm x 28mm

Instrukcija – OPERATING MANUAL

Prezentācija